[RingLeader]

Here's some stuff I have been working on yesterday and today. I started by waxing a piece of smooth masonite. I laid out 3 layers of 1808 and then set the whole thing on the livewell. This is a lid to keep water from sloshing out of the livewell. A hole will be cut in the top when the new top of the leaning post is ready to go to place.





Next I started on an MDF mold to make a new back seat of the leaning post. There is a recessed opening with a lip that will entend about 2.5" down to help keep the sloshing water in the well. Modeling clay was used for fillets and then a coat of Partall and a coat of PVA. I just cut the glass for the laminates and will do the layup tomorrow morning.